Strength Design in Aluminum
A Review of Three Codes
Prepared by the Task Committee on Strength Design in Aluminum of the Committee on Special Structures of the Committee on Metals of the Structural Engineering Institute of ASCE. ...
On the Inelastic Design of Steel I Girder Bridges
This paper documents the development of a relatively easy to use set of effective plastic moment expressions and compares the performance of these equations with a series of experimental...
A More Perfect Union
Established to promote greater public understanding of the United States Constitution, the National Constitution Center facility in Philadelphia is a structure of complex geometries articulated...
Torsion of Reinforced Concrete -A Historical Overview
The story of torsion of reinforced concrete must start with the French professor, C. L. Navier. In his landmark book (Navier, 1826) he rigorously derived the first rational theory for...
Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...
Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...
Evaluation of Anchor Wall Systems' Landmark Reinforced Soil Wall System
With T.C. Mirafi's Miragrid & Miratex Geogrid Reinforcement ?Final Report
This report describes a HITEC evaluation designed to determine the basic capability and limitations of the Landmark/Mirafi System for use as a technically viable precast MSE retaining...
Use of Coal Combustion By-Products as Low-Permeability Liners for Manure Storage Facilities
This chapter presents an overview of the use of compacted flue gas desulfurization (FGD) material as a low-permeability liner. It discusses the engineering characteristics of FGD materials...
Building the Olivenhain
Engineers in California were hired to create a reservoir capable of providing the San Diego region with 24,000 acre-feet of water during an emergency shortage. The result is the Olivenhain...
Development of Transportation Engineering Research, Education, and Practice in a Changing Civil Engineering World
Transportation has been one of the essential areas within civil engineering since its early days. In commemoration of the 150th anniversary of ASCE, this paper presents a review of developments...
Cementitious Materials�Nine Millennia and A New Century: Past, Present, and Future
Cementitious materials have been used in construction for several millennia and through several civilizations. Their use has been revitalized in the recent century, and they have become...
Wood and Wood-Based Materials: Current Status and Future of a Structural Material
Wood is one of the earliest construction materials, and the structural use of wood and wood-based materials continues to steadily increase. In fact, new wood-based materials continue to...
Use of Fiber Reinforced Polymer Composites as Reinforcing Material for Concrete
Although the potential of continuous fiber reinforced polymers (FRPs) was recognized more than 50 years ago, bottlenecks such as vulnerability to static fatigue, ultraviolet radiation,...
History of Hot Mix Asphalt Mixture Design in the United States
Asphalt has been used as a construction material from the earliest days of civilization, but though it has long been used as a waterproofing material in shipbuilding and hydraulics, its...
Can Less Be More?
With its higher strength and improved performance characteristics, high-performance steel is indeed an alluring materials. Its cost, however, also is higher, a factor that cannot be ignored....
Initial Considerations
The purpose of this section is to aid the line designers in developing their specifications for fiber-reinforced polymer (FRP) materials utilized in electric overhead line structures....
Materials and Manufacturing Processes
This chapter introduces the basic materials used in the manufacturing of composite structures. It will help the line designer in understanding how the different elements of the fiber-matrix...
Design Loads
This chapter discusses the types of loadings that should be considered when designing overhead power lines utilizing fiber-reinforced polymer (FRP) poles. For infrastructure applications...
Performance-Based Criteria for FRP Products and Materials
In most ways, fiber-reinforced polymer (FRP) structures perform similar to wood and steel structures. There are, however, certain differences and these differences are described in this...
Suggested Guidelines for Performance-Based Tests
Although several standard tests are cited in this chapter, these tests are not designed specifically for fiber-reinforced polymer (FRP) overhead line structures. There are, in fact, no...
Return to search